Bartscher IK 35dp Mode D'emploi page 29

5.5 Operating (both heating areas)
•
Insert the plug into an appropriate single outlet.
•
The readiness indicator located above the ON/OFF switch will come on and an
audio signal will sound. The unit is now in sensory mode.
•
Place an appropriate article of cookware in the center of the heating plate which is to
be used.
Setting power level
•
Press .
Power level „5" is selected, and the unit will come on.
The buttons
1 – 10. The selected power level for a given heating plate will appear on the
digital display.
Power levels and power for each heating plate
Left plate (500-2000 W)
1 = 500 W cyclical heating
2 = 800 W
3 = 1000 W
4 = 1200 W
5 = 1400 W
6 = 1550 W
7 = 1600 W
8 = 1800 W
9 = 1900 W
10 = 2000 W
NOTE!
The above may differ according to the type of cookware used.
Setting temperature level
•
If you do not wish to use power levels, by pressing
temperature mode.
A temperature level of „120° C" is set and the unit will come on.
(Temperature levels: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C).
- 28 -
or can be used at any moment to change the power level from
(Right plate 600-1500 W)
(600 W cyclical heating)
(700 W cyclical heating)
(800 W cyclical heating)
(900 W cyclical heating)
(1000 W)
(1100 W)
(1200 W)
(1300 W)
(1400 W)
(1500 W)
you may switch to