Julabo PURA 4 Mode D'emploi page 43

Preparations
Pos : 17 /=== T echnisc he Dokumentation/C ORIO / D YN EO / MAGIO / PUR A/PURA LT /Inbetriebnahme - N etzs pannung,PURA @ 1\mod_1472203188618_18.doc x @ 9972 @ 1 @ 1
Filling
:
Maximum filling height:
the bath
Minimum filling height:
platform
Emptying
:
7. Switch off the water bath at the mains switch.
8. Disconnect the mains cable from the water bath.
9. PURA 4 can now be distributed. The same applies to all
other baths:
10. Place a suitable receptacle for the bath fluid under the
drain opening. Unscrew the drain screw.
11. Empty the bath.
12. After complete draining, close the drain opening with the
drain screw.
The bath is empty.
approx. 20 mm below the edge of
approx. 5 mm above the adjustable
43