JVC KW-M24BT Mode D'emploi page 22

Installation
Ñ Connecting wires to terminals
USB device
[2]
Accessory 4:
Bluetooth Microphone
(KW-M24BT only)
Subwoofer Preout
Connector B
1 3 5 7
2 4 6 8
1 3 5 7
Connector A
2 4 6 8
Ñ Wiring harness connector function guide
Pin Color and function
A-4 Yellow
A-5 Blue/White [3]
A-7 Red
A-8 Black
B-1/ B-2 Purple (+) / Purple/Black (–)
B-3/ B-4 Gray (+) / Gray/Black (–)
B-5/ B-6 White (+) / White/Black (–)
B-7/ B-8 Green (+) /
Green/Black
• Speaker Impedance: 4-8 Ω
!
CAUTION
Before you connect the commercially available ISO
connectors to the unit, check the following condition:
• Make sure that the pin assignment of the connector
matches with the JVC unit.
• Take extra notice of the power wire.
• In case battery wire and ignition wire are not
corresponding then change them accordingly.
• In case the car does not have an ignition wire, use a
commercially available interface.
22
USB terminal (0.8 m)
[1]
5V = 1A
Cap
MIC
SUB
WOOFER
Cap
AV-IN
L
15A
R
V
Fuse (15A)
ISO Connector
Battery
Power Control
Ignition (ACC)
Earth (Ground) Connection
Rear Right
Front Right
Front Left
(–) Rear Left
Light Green
(Parking sensor wire)
Accessory 9: Extension cable
For best safety, be
sure to connect the
parking sensor.
Purple/White
(Reverse sensor wire)
Light Blue/Yellow
(Steering remote control wire)
REAR FRONT
FM/AM antenna input
L L
R R
CAM VOUT
ANT
USB maximum power supply current : DC 5 V = 1 A
[1]
Sold separately
[2]
[3] Max. 300mA, 12V
Connect to vehicle's reverse lamp harness
when using the optional rear view camera.
To steering remote
To use the steering wheel remote control
feature, you need an exclusive remote
adapter (not supplied) matched to your car.
FM/AM antenna
AV-IN audio input
(Left; White, Right; Red)
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Visual Output (Yellow)
Rear view camera input (Yellow)
AV-IN visual input (Yellow)
Connect to the
vehicle's parking
brake detection
switch harness.