Controlling Audio; Controlling General Audio; Equalizer Control; Subwoofer Settings - JVC KW-M24BT Mode D'emploi

Controlling Audio

Controlling General Audio

1
Press the < > button.
2
Touch [Settings].
3
Touch [Audio].
4
Touch [Sound Effect].
5
Touch [ ].
6
Set each item as follows.
Fader Adjust the front and rear volume balance.
12 (front) to -12 (rear)
[ ] [ ]
Balance Adjust the left and right volume balance.
12 (right) to -12 (left)
[ ] [ ]
[Reset] To clear the adjustment.
Ñ Loudness
1
Press the < > button.
2
Touch [Settings].
3
Touch [Audio].
4
Touch [Loudness].
Sets the amounts of boost of low and high tones.
"ON", "OFF" (Default)

Equalizer Control

1
Press the < > button.
2
Touch [Settings].
3
Touch [Audio].
4
Touch [Sound Effect].
5
Set each item as follows.
1
2
1 You can select frequency bar and adjust its level.
(-7 to +7)
• The adjustments are stored and "User" is activated.
2 To recall the preset equalizer curve.
3 The "User" preset and the current EQ curve returns
to flat.

Subwoofer settings

1
Press the < > button.
2
Touch [Settings].
3
Touch [Audio].
4
Touch [Subwoofer].
5
Set each item as follows.
Frequency Low Pass Filter adjustment. /
[OFF]: Turns off the subwoofer
[80Hz], [120Hz],
output. (Default OFF)
[160Hz], [OFF]
Volume Adjusts the subwoofer level. 0 to 12
(Default 6)
[–], [+]
3
English |
17