Stihl HTA 65 Notice D'emploi page 52

English
► Use the working techniques described in this instruction
manual.
► Do not cut with the upper quadrant of the bar nose.
► Always cut with a properly sharpened and tensioned
saw chain.
► Use a reduced kickback saw chain.
► Use a guide bar with a narrow radius nose.
► Always cut with the chain running at full speed.
4.8.2 Pull-In
The pole pruner is pulled away from the operator when the
bottom of the bar is used for cutting.
WARNING
￭ If the rotating chain makes contact with a hard object and
is suddenly pinched, the pole pruner is abruptly jerked
away from the operator. The user can lose control of the
pole pruner and be seriously injured.
► Always hold your pole pruner firmly with both hands.
► Use the working techniques described in this instruction
manual.
► Keep the guide bar straight in the cut.
► Apply the stop properly.
► Always cut with the chain running at full speed.
50
4.8.3 Pushback
The pole pruner is pushed back toward the operator when
the top of the bar is used for cutting.
WARNING
￭ If the rotating chain makes contact with a hard object and
is suddenly pinched, the pole pruner is abruptly pushed
back toward the operator. The user can lose control of the
pole pruner and be seriously injured.
► Always hold your pole pruner firmly with both hands.
► Use the working techniques described in this instruction
manual.
► Keep the guide bar straight in the cut.
► Always cut with the chain running at full speed.
4 Safety Precautions
0458-766-9921-B