Boiling Water; Cleaning And Maintenance; Rectifying Minor Faults Yourself - Bosch TTA5 Série Mode D'emploi

en
– Always use up the tea extract in the
teapot and do not refill with water.
Info: The water and tea are kept warm by
setting the switch to ä. This saves up to
90% energy. If the kettle is refilled with fresh
water, first bring the water to the boil and
then keep warm.

Boiling water

X Image sequence D
The kettle can also be used without the
teapot.
1. Fill the kettle with water, observing the
min and max markings.
2. Position the kettle lid at the ▼ marking
Ä
and lock . Place the kettle on the base.
3. Set the selection button to "boil" ö and
press the On/Off switch down. The
switch lights up.
4. As soon as the water has boiled, the
kettle automatically switches to "keep
warm" ä. The indicator light lights up.
If you do not want to keep the water warm,
switch off the kettle with the On/Off switch.
Caution: If you remove the kettle from
the base and replace it before the heating
process is over, the kettle will continue to
heat the water.
Notes:
– Water should only be boiled with the lid
closed and the limescale filter inserted.
– For reasons of physics condensation
may form on the base. This is a normal
process, and the kettle is not leaking.
– Do not turn on the appliance if the kettle
is empty or the overheating protection
will be triggered and the appliance will
switch off automatically.

Cleaning and maintenance

W Risk of electric shock!
Never immerse the kettle or base in water
or place in the dishwasher. Do not steam-
clean the appliance.
■ Pull out the mains plug.
10
■ The kettle and base should only be
wiped down on the outside with a damp
cloth. Do not use harsh or abrasive
detergents.
■ Remove the limescale filter and place in
a little vinegar. Rinse with plain water.
■ Rinse the kettle and limescale filter with
plain water.
■ The teapot, teapot lid and tea filter can
be placed in the dishwasher.
Tip: Clean the stainless steel surface with a
standard care product for stainless steel.
Descaling
Regular descaling
– prolongs the service life of the appliance
– ensures that it functions properly
– and saves energy.
Descale the kettle with vinegar or a stand-
ard descaling agent.
■ Fill the kettle with water up to the max
mark and bring to the boil.
■ Then add a small amount of white
vinegar and let it act for several hours.
You can also use a descaling agent
according to the manufacturer's instruc-
tions.
■ Then rinse the kettle and limescale filter
with plain water.
Caution: Never use hard objects to remove
limescale residue as this will damage the
seal.
Tip: Descale the kettle frequently
in daily usage.
Rectifying minor faults
yourself
Appliance does not heat up.
– The overheating protection has
triggered.
■ Let the kettle cool down for a while so
that the appliance can be switched on
again.