Publicité
®
R&S
RT-ZZ80
2
Putting into Operation
The R&S RT-ZZ80 transmission line probe has been designed to withstand a
moderate amount of physical and electrical stress. You should treat the probe
with care. It can be damaged if excessive force is applied to the probe tip.
Exercise care to prevent the probe from receiving mechanical shock.
Avoid putting excessive strain on the probe cable or exposing it to sharp
bends.
Store the probe in a shock-resistant case such as the foam-lined shipping
case that came with the probe.
Voltages above the specified limits of the R&S RT-ZZ80 transmission line
probe may damage the probe.
Do not exceed the specified limits.
During operation, the probe may heat up slightly. This is normal behavior and not
a sign of malfunction.
User Manual 1409.7689.02 ─ 02
Putting into Operation
14
Publicité
