Publicité
®
R&S
RT-ZZ80
1
Product Description
1.1
Safety Instructions for R&S RT-ZZ80
When handling R&S RT-ZZ80 transmission line probes, the following basic rules
must be observed. Prior to using a probe, read the applicable manual including
the safety instructions. Keep the safety instructions and the product documenta-
tion in a safe place and pass them on to other users. Use the R&S RT-ZZ80
exclusively within the measurement ranges specified in the applicable data
sheets. Rohde & Schwarz accepts no responsibility for misuse of the product.
Use only the accessories supplied with the R&S RT-ZZ80.
Risk of electric shock
Do not connect an R&S RT-ZZ80 to any voltage that exceeds the maximum
permissible input voltage specified in the data sheet. Non-compliance with
this instruction carries the risk of an electric shock.
Make sure not to cause any short circuits when performing measurements
on sources with high output currents. Short circuits may cause injuries or
burns.
Risk of injury caused by pointed object
The pins of the probe are extremely pointed and can easily penetrate
clothes and the skin.
Therefore, handle the probe pins with great care. When transporting the
probe, e.g. when carrying it in a pocket or tool bag, always use the box sup-
plied with the probe. To exchange a probe pin, use tweezers or pliers to
avoid injuries.
User Manual 1409.7689.02 ─ 02
Product Description
Safety Instructions for R&S RT-ZZ80
5
Publicité
