Batch Counter - Neopost IM-22 Guide De L'utilisateur

OPERATION
Using the touch screen

Batch Counter

The IM-22 and IM-27 letter openers are equipped with a batch counter. The batch counter
allows the operator to set a specific number of envelopes to process, start the machine, and
the machine will turn off once this number has been reached.
Batch Counter
To set the batch value, press the set batch button in the lower right hand corner of the batch
counter screen. The following screen will appear:
Batch Counter User Entry
The number in the top box is the current batch counter value. To change this value, press on
the number. After pressing on the number, a keypad will appear allowing for the number to be
changed. The batch counter can be set equal to or between 1 and 10,000. Once the value has
been entered, press the confirm button to set the batch counter value.
Pressing the start button will start the current batch. The machine will continue to
run until the stop button is pressed or the batch is complete.
Pressing the stop button will stop the machine and pause the batch counter. The
batch counter only runs from the batch counter screen.
Pressing the reset button will reset the batch counter to the preset batch counter
value.
PAGE 11