Elem Garden Technic DCBT43D-16 Traduction Des Instructions Originales page 72

STOPPING THE ENGINE
1. Return the throttle lever to the idling position.
2. Push the engine switch button.
(3) Engine switch button
7.OPERATION
CUTTING OPERATION
METAL BLADE USAGE
Always cut by guiding the head from your right to left.
A metal blade cut best up to the point 1/3 from the edge. Use that area for cutting shrubs, tough and thick weeds. For
cutting young grass, you can use up to 2/3from the tip of blade.
IMPORTANT
Operating at low speed makes it easier for grass,weeds,or twigs to become caught up in the blades, and also it makes the
shaft and clutch wear down more quickly.
WARNING
·For safety reasons,do not use metalreinforced line.
·Do not cool the blade with water in case of using grinder.It may cause cracks on blade.
72