Publicité
Les langues disponibles
Les langues disponibles
THINGS TO CHECK BEFORE USING YOUR BRUSHCUTTER
(a)Before beginning work, look around carefully to get a feel for the shape ，and remove any obstacles which can be
cleared away.
(b) Make sure that there are no loose screws or bolts, fuel leaks, ruptures, dents, or any other problems which mingt
interfere with safe operation. Be especially careful to check that there is nothing wrong with the blades or with the joins
by which the blades are attached to the brush cutter.
(c) Never use blades that are bent,warped,cracked,broken or damaged in any way.
Keep the blade always sharp.
(d) Check the bolt to fasten the blade and be sure the blade turns smoothly without abnormal noise.
NOTES ON STARTING THE ENGINE
1.Take a careful look around to make sure that no obstacles exist within a perimeter of 15m or less around brush cutter.
2.Place the body of the brush cutter onto the ground in a flat clear area and hold it filmly,in place so as to ensure that
neither the cutter parts nor the throttle come into contact with any obstacles when the engine starts up.
3.Place the throttle into the idling position when starting the engine.
KICKBACK SAFETY PRECAUTIONS
1.Before beginning work, clear your working area and remove grasses around the obstacles.
2.When using your brush cutter, do not grip other parts except the handles.
3.When using your brush cutter, never take your eyes off. if you need to, place the throttle into the idling position.
4.When using your brush cutter, do not let the unit get closer to your feet nor raise the unit above your waist.
NOTES ON TRANSPORTATION
(a). Make sure the appropriate blade cover is in place.(if blade is equipped)
OPERATION SAFETY PRECAUTIONS
(a).Grip the handles of the brush cutter firmly with both hands. If you suspend the work, place the throttle into the idling
position.
(b).Always be sure to maintain a steady,even posture while working.
(c). Maintain the speed of the engine at the level required to perform cutting work., and never raise the speed of the
engine above the level necessary.
d. Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an
electrical shock.
e. Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or
immediately after shutting down the engine. Doing so may result in serious burns.
f. .when you finish cutting in one location and wish to continue work in another spot, turn off the engine and turn the unit
as the cutting parts faces away from your body.
68
Publicité
