Publicité
Les langues disponibles
Les langues disponibles
General instructions
To ensure correct operation, user has to read this
instruction manual to make -himself familiar with the
handling of the Multi Function Power Head. Users
insufficiently informed will risk danger to themselves as
well as others due to improper handling.
It is recommended only to lend the Multi Function Power
Head to people who have proven to be experienced with
Multi Function Power Heads.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to
familiarize oneself with the handling of an engine
powered cutter.
Children and young persons aged under 18 years must
not be allowed to operate the Multi Function Power Head.
Persons over the age of 16 years may however use the
device for the purpose of being trained only whilst under
supervision of a qualified trainer.
Use Multi Function Power Heads with the utmost care
and attention.
Operate the Multi Function Power Head only if you are in
good physical condition. Perform all work calmly and
carefully. The user has to accept liability for others.
Never use the Multi Function Power Head after
consumption of alcohol or drugs, or if feeling tired or ill.
National regulation can restrict the use of the
machine.
Read the instruction manual before using the machine and keep it.
SAFETY INSTRUCTIONS
CAUTION:
Personal protective equipment
The clothing worn should be functional and appropriate,
i.e. it should be tight fitting but not cause hindrance. Do
not wear either jewelry or clothing which could become
entangled with bushes or shrubs.
In order to avoid either head-, eye-, hand-or foot injuries
as well as to protect your hearing the following
protective equipment and protective clothing must
be used during operation of the Multi Function Power
Head.
Always wear a helmet where there is a risk of falling
objects. The protective helmet is to be checked at regular
intervals for damage and is to be replaced at the latest
after 5 years. Use only approved protective helmets.
The visor of the helmet (or alternatively goggles) protects
the face from flying debris and stones. During operation
of the Multi Function Power Head always wear goggles,
or a visor to prevent eye injuries.
Wear adequate noise protection equipment to avoid
hearing impairment (ear muffs, ear plugs etc.).
The work overalls protect against flying stones and debris.
We strongly recommend that the user wears work
overalls.
Special gloves made of thick leather are part of the
prescribed equipment and must always be worn during
operation of the Multi Function Power Head.
When using the Multi Function Power Head, always wear
sturdy shoes with a non-slip sole. This protects against
injuries and ensures a good footing.
55
Publicité
