dirna Bergstrom Bycool Green Série Instructions De Montage page 20

COMPACT 3.0
EN
2
2
1- Connect the upper power supply cable to the back of equipment and lead it through the back of the cab whilst
sticking down the plastic clips and securing it with flanges.
2- Connect the lower power supply cable to the battery by leading it through the original cable route, secured with
flanges, to the back of the cab, to connect it with the upper power supply cable. WHEN CONNECTING THE
CABLES LEAVE A SUFFICIENT DISTANCE TO PREVENT THEM BREAKING DUE TO MOVEMENTS
OF THE CAB!!
IMPORTANT: Due to the equipment's complex electronic regulation system, the socket must be made
directly on the vehicle's battery.
IMPORTANT: For start up please see the User's Manual.
3
Detailed instructions
on power wiring assembly
2
+
wiring for
power
supply
-
3- Place danger stickers on the cable join and on
the cab elevation device.
20
3
®
1