Publicité
Les langues disponibles
Les langues disponibles
Programming (continued)
Provisioning Wi-Fi
Follow the below instructions to pair the operator:
1.
Press the "STOP/ENTER" and "DOWN" buttons at the same time for 3+ seconds to enter the operator menu.
2.
Scroll down to "SYSTEM SETTINGS" with the "UP" and "DOWN" buttons and press "ENTER". You will be prompted
to enter the password for the operator.
3.
Enter 326 as the password.
4.
Scroll down to "CONNECTIVITY" and press "ENTER".
5.
Press "ENTER" again to select "CONNECTIVITY LEARN".
6.
Scroll down to "LEARN WIFI" and press "ENTER". The operator will now be in Learn Mode.
7.
Using your own device (laptop, tablet, or smart phone) go to your device's Wi-Fi setting and search for the Wi-Fi
network called myQ-nnn where the nnn is the last 3 serial numbers of your operator. Select that Wi-Fi network.
8.
Once your device (laptop, tablet, or smart phone) is connected to the operator, open a web browser and go to
setup.myqdevice.com or the direct IP address which is 192.168.1.1 on your device and follow the instructions.
Resetting Wi-Fi Credentials
1.
Enter the menu and navigate to SYSTEM SETTINGS, and enter the password.
2.
Navigate to CONNECTIVITY.
3.
Enter the UNLEARN submenu.
4.
Navigate to WI-FI.
5.
Save your changes by selecting SAVE.
6.
Exit the menu by holding the up and stop buttons on the wall control.
myQ® Smart Facility Access
One Platform allows you to manage access for unlimited facilities, users and vehicles.
The myQ® Smart Facility Access allows you to control all your access points in the facility from the myQ® website
application from anywhere. Monitor and control your vehicular access doors, gated entry locations, and even dock
positions from a universal platform. myQ® technology uses a 900Mhz signal or a Wi-Fi connection to communicate
securely from your connected devices to myQ® enabled accessories or directly to a Wi-Fi network.
Setup a myQ® Smart Facility Access Account
NOTE: If you have an existing myQ® account, your myQ® Business™ account will have the same password.
We have made the account setup process easier than ever. It's completely self-service. Go to Account.myQ.com and
begin the process.
1.
Select Country, Name, email, and create password.
2.
Verify the email with a 4-digit code.
3.
Select property manager or partner.
4.
To create a myQ® Facility, select property type, property name, property manager information. You are now ready
to access your dashboard and all other myQ® features.
5.
Set up the Facility and add users and groups to provide access to the Facility (refer to the available Help in myQ®
Business™).
6.
You will get a welcome email from LiftMaster. Accept the invitation and register or login to your account.
7.
Set up the Facility and add users & groups to provide access to the Facility (refer to the available Help in myQ®
Business™).
8.
Follow on-screen prompts to get your Variable Speed Door Operator and additional devices connected.
46
Publicité
