Linea 2000 DOMO DO1037A Mode D'emploi page 52

INSTALLATION
· Place the airco on a solid and stable floor, this way you will
prevent excessive noice and vibrations. Make sure that the floor
is strong enough to support the weight of the appliance.
· The appliance has small wheels for easy moving. Make sure only
to move the airco over a flat and level surface. Be careful when
moving the airco over carpet. Never roll the unit over an object.
· Place the unit near an earthed socket.
· Never place any object within 30 cm round the airco.
· The air outlet hose must be used in the "cool" or "auto" mode.
During the "fan" or "dry" mode, you don't need to attache the
air outlet hose.
· Make sure there is a free surrounding of at least 50 cm around the outlet.
· Make sure the air outlet hose isn't bend during use.
INSTALLATION OF THE WINDOW KIT
· Place the coupling of the air outlet hose on the end of the hose.
· Place the air outlet hose on the air outlet at the back of the appliance.
· Place the coupling of the window attachment on the other end of the air outlet hose.
· Place the window adaptor in your window. This is possible for horizontal and vertical sliding
windows. Block the window adapter at the desired length.
· Attach the hose with the coupling to the window adapter.
· Make use of the window seals to close off any possible openings in the window.
52
DO1037A
max 120 cm
min 30 cm
max 120 cm
min 30 cm