Changing The Frequency Step - Pioneer HTS-260 Mode D'emploi

06 Listening to the radio

Changing the frequency step

If you find that you can't tune into stations successfully,
the frequency step may not be suitable for your country/
region.
1 Switch the system into standby.
2 Press SETUP .
3 Use the
'AM 9K/10K', then press ENTER .
4 Use the
setting then press ENTER to confirm.
• AM 9K – 9 kHz step for AM;
50 kHz step for FM
• AM 10K – 10 kHz step for AM;
100 kHz step for FM
24
En
(cursor left/right) buttons to select
(cursor up/down) buttons to select a