6.7 Initial start-up
To obtain accurate weighing results with electronic scales, the appropriate operating
temperature is to be provided for them (refer to „Warm-up time", section 1).
During warm-up the scale must be connected to power supply and switched on
(mains socket or batteries).
The accuracy of the scale depends on the local acceleration of gravity.
The value of acceleration of gravity is given on the rating plate.
6.8 Menu overview
When the scale is switched on, hold the [→0←] key pressed for about 3 seconds
until the display shows successively the „SETUP" and „A.OFF" symbols.
Selection is carried out with the [TARE]
Function
Settings
SEtuP
180 s
A. oFF
Automatic turning
240 s
off, Auto Off func-
300 s
tion
oFF
120 s
burr
on
Acoustic signal
oFF
End
Leaving menu after pressing
MPS / MTS / MWS / MXS-BAPS-e-1912
and [HOLD]
Description
Automatic turning off after 3 minutes
Automatic turning off after 4 minutes
Automatic turning off after 5 minutes
Automatic turning off turned off
Automatic turning off after 2 minutes
Acoustic signal turned on
Acoustic signal turned off
HOLD
button
keys.
33