Publicité
Les langues disponibles
Les langues disponibles
Rinse the filters under running water.
For a more thorough clean, use a
soft cleaning brush.
WARNINGS!
Do not over tighten the filters. Put the filters back in sequence securely, otherwise coarse debris could
get into the system and cause a blockage.
Never use the dishwasher without filters in place. Improper replacement of the filters may reduce the
performance level of the appliance and damage dishes and utensils.
Cleaning the spray arms
It is necessary to clean the spray arms regularly, otherwise hard water chemicals will clog the spray arm
jets and bearings.
To clean the spray arms, follow the instructions below:
T o remove the upper spray arm,
hold the nut in the centre still and
rotate the spray arm anticlockwise
to remove it.
Reassemble the filters, replace the
filter insert, and rotate clockwise to
the close arrow.
To remove the lower spray arm, pull
out the spray arm upward.
GB-25
Publicité
