Publicité
Les langues disponibles
Les langues disponibles
Refilling the rinse aid dispenser
Unless the rinse-aid warning light
from the color of the rinse-aid indicator. When the rinse-aid container is full, the indicator will be fully
dark. The size of the dark dot decreases as the rinse-aid diminishes. You should never let the rinse aid
level be less than 1/4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid indicator changes, as illustrated
below.
Full
Adjusting the rinse aid dispenser
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust the
consumption by user. Follow the below steps:
1. Power on the dishwasher.
2. Within 60 seconds after powering on the dishwasher, press and hold
press
to enter the setting mode.
Ÿ The display will show d3.
3. Repeatedly press
4. The setting will be confirmed if there is no operation
in about 5 seconds.
Filling the detergent dispenser
1. Slide the control to the
right to open the
detergent cap.
on the control panel is on, you can always estimate the amount
3/4 Full
to select the proper setting.
2.
Add the detergent into the
compartment.
1/2 Full
A
A
GB-20
1/4 Full
Empty
for about 5 seconds and then
Amount of
Display
rinse aid (mL)
d1
d2
d3
d4
d5
3.
Close the cap by sliding
it to the front and
pressing it down.
1.2
2.4
3.6
4.8
6.0
Publicité
