Publicité
Les langues disponibles
Les langues disponibles
• Fill the salt container before starting the washing program. In this way, the excess saline solution
will be immediately removed by the water; the prolonged presence of salt water inside the tank may
lead to corrosion.
Adjusting the salt consumption
1. After the diswasher is switched on, enter the status of adjusting the salt consumption by pressing and
holding
until the display shows H3.
2. Repeatedly press
3. Press
to validate settings.
WATER HARDNESS
°dH
°fH
0 – 5
0 – 9
6 – 11
10 – 20
12 – 17
21 – 30
18 – 22
31 – 40
23 – 34
41 – 60
35 – 55
61 – 98
Factory setting: H3
NOTE:
1 °dH=1.25 °Clarke= 1.78 °fH= 0.178 mmol/l
°dH: German degree
Filling with salt
The salt container must be refilled when the salt warning light
1. Remove the lower basket and unscrew the cap from the salt container.
2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg dishwasher salt.
3. Fill the salt container to its maximum limit with water.
It is normal for small amount of water to come out of the salt container.
4. Screw back the cap tightly.
NOTE: Depending on how well the salt dissolves, the salt warning light
the salt container is filled.
to adjust the setting to suit the water hardness.
°Clarke
Mmol/l
0 – 6
0 – 0.94
7 – 14
1.0 – 2.0
15 – 21
2.1 – 3.0
22 – 28
3.1 – 4.0
29 – 42
4.1 – 6.0
43 – 69
6.1 – 9.8
°fH: French degree
Display
H1
H2
H3
H4
H5
H6
°Clarke: British degree
illuminates.
GB-18
Salt consumption
(gram / cycle)
0
9
12
20
30
60
may still be on even though
Publicité
