Publicité
Les langues disponibles
Les langues disponibles
Applying the Condensation Strip
The condensation strip must be fitted to the underside of the worktop to protect it
against the ingress of moisture.
1. Ensure that the underneath of the worktop is clean.
2. Separate the backing paper away from the strip.
3. Stick the condensation strip to the underneath of the worktop.
Cold Water Connection
The installation of the hose should be done by professionals.
Connect the supplied water supply hose to a threaded
3/4" connector and make sure that it is fastened tightly
in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure
that the water is clear. This precaution is needed to avoid
the risk of the water inlet to be blocked and damage the appliance.
Connection of the Drain Hose
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run
into the sink, making sure to avoid bending or crimping it. The height of drain pipe
must be less than 1000mm. The free end of the hose must not be immersed in water to
avoid the back flow of it.
Please securely fix the drain hose in either position A or position B.
The installation of the hose should be done by professionals.
GB-8
Publicité
