Publicité
Les langues disponibles
Les langues disponibles
Use a USB car charger with an output voltage of maximum 5 Volt and a
charging capacity of maximum 1 Ampere. Never try to use other USB car
chargers.
2.
Insert the charging cable (delivered with fan - USB MICRO B connection) in the
charging connection of your Cordless Fan.
3.
Connect the other end of the charging cable (USB A connection) to:
- The USB mains adapter (max. 1 Ampere)
- The USB car charger (max. 1 Ampere)
- The USB A port
4a. Insert the USB mains adapter in the socket (220/240 Volt 50 Hz).
4b. Connect your USB car charger to a DC-cigarette lighter connection.
5.
After charging, disconnect all the connections.
If the fan is switched off during charging, the LED lights indicate the charge level.
See the table below:
Battery power
<25%
Between 25 and
49%
Between 50 and
74%
Between 75 and
99%
100%
Switch off the fan during charging. If you want to use the fan during charging, then
switch the fan to a quiet, low or medium speed. The fan might switch off
automatically if you put the fan on a high speed during charging.
Checking the battery power
By pressing the On/Off button 1.5 seconds, you can check the battery power level
when the fan is switched off. The number of burning LEDs indicates the level of the
remaining power.
Battery power
< 25%
Between 25 and
50%
Between 50 and
75%
Between 75 and
100%
LED lamp 1
LED lamp 2
Slow blinking
Off
On
Slow blinking
On
On
On
On
On
On
LED lamp 1
On
Off
On
On
On
On
On
On
LED lamp 3
Off
Off
Slow blinking
Off
On
LED lamp 2
LED lamp 3
Off
Off
On
On
19
LED lamp 4
Off
Off
Off
Slow blinking
On
LED lamp 4
Off
Off
Off
Off
Publicité
