Bench Mounting; Functional Description - Makita XSL02 Manuel D'instruction

19 Slide pole (upper)
23 Lever (for bevel angle
adjustment)
INSTALLATION

Bench mounting

WARNING:
Ensure that the tool does not
move on the supporting surface. Movement of the
miter saw on the supporting surface while cutting may
result in loss of control and serious personal injury.
1.
Fix the base to a level and stable surface, screw-
ing with two bolts. This helps to prevent from tipping and
possible injury.
1
1. Bolt
2. Turn the adjusting bolt clockwise or counterclock-
wise so that it comes into a contact with the floor sur-
face to keep the tool stable.
6 ENGLISH
22
25
20 Thumb screw (for lock-
ing upper slide pole)
24 Slide pole (lower)
1
19
24
21 Hex wrench
25 Thumb screw (for lock-
ing lower slide pole)
1
1. Adjusting bolt
FUNCTIONAL
DESCRIPTION
WARNING:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking the functions on
the tool. Failure to switch off and remove the battery
cartridge may result in serious personal injury from
accidental start-up.
20
21
22
23
22 Clamp screw (for locking
holder)
- -