Publicité
Les langues disponibles
Les langues disponibles
Fault
The light does not function.
The "cool-fresh"
compartment is too warm or
too cold.
Possible cause
The LED light is defective.
Appliance was open too
long.
Light is switched off after
approx. 10 min.
The standard setting has
been set too high or too low
(e.g. if there is frost
in the "cool-fresh"
compartment).
Remedial action
See chapter "Light (LED)" section.
When the appliance is closed and opened,
the light is on again.
The temperature in the "cool-fresh"
compartment can be set to be 3 steps warmer
and/or colder, Fig. ". If the refrigerator
compartment temperature is set to 0,
the "cool-fresh" compartment has
a temperature of almost 0 °C.
1. Hold down "super" button 2 for 3 seconds
until temperature display 4 flashes.
2. Change the setting using the temperature
setting button 3.
Setting -3 corresponds to the coldest
setting
Setting +3 corresponds to the warmest
setting
The selected setting is saved after one
minute.
en
33
Publicité
