M+W Dental SUPERLITE POWER PEN Mode D'emploi page 11

Instructions for use
Attention!
Read the operating instructions carefully
before installation and operation of the device.
Contents:
I. Description and mode of function of the M+W Superlite Power Pen/Color Pen
II. Technical data
III. accessories and spare parts
IV. Safety precautions
V. Preparation and sequence of operation
VI. Care and maintenance
VII. Warranty conditions
VIII. Symbols
IX. Date of purchase / serial number M+W Superlite Power Pen/Color Pen
(to be filled in by purchaser)
I. Description and mode of function M+W Superlite Power Pen/Color Pen
Cordless LED light polymerisation lamp for intraoral hardening of light-curing, dental materials. The wavelength of the emitted light lies
in the range 410 nm to 490 nm. The M+W Superlite Power Pen/Color Pen is manufactured taking into account Directive 93/42 EEC and
Directive 2007/47/EC.
II. Technical data
1. Operating voltage: 3.7 V Li-ion rechargeable battery (800 mah)
2. Power consumption: mains adaptor - 110-240 VaC/50-60 Hz, 0.2-0.1 a Output: 5 VDC/1.2a micro USB socket
3. Dimensions: diameter of handpiece approx. 25 mm, length of handpiece without light conductor 148 mm
4. Weight of handpiece: 105 g
5. Light intensity: up to 1.100 mw/cm²
6. Exposure duration: soft start mode, settings 10 sec./ 20 sec. / 30 sec., continuous operation up to max. 10 minutes
7. Wavelength range: 410 nm to 490 nm, blue emittance
8. Light source: 4 powerful LED crystals in module
9. Charging time: 6-8 hours for full charge and 3-4 hours to 80% of full charge.
10. Operating duration: 2.000 seconds for fully charged battery
11. Signal: acoustic signal every 10 seconds and colour indicator ring on handpiece which indicates the
condition of the device. See V./section 3
11