Rodec MX180 MKIII Mode D'emploi page 4

RODEC
Left ear signal select switch
8)
With this switch you can listen to the mixed signal in the left loudspeaker of the headphones.
This signal appears then also on the right VU-meter. On the right headphones speaker and
the left PFL VU-meter will the PFL-signal still be displayed.
PFL switches
9)
With these switches you can select the different input sources that you will listen to with the
headphones.
Input selector
10)
This switch is used to select the input signal: PHONO/AUX/CD/DAT/MD or
MICROPHONE.
Level adjuster
11)
These controls are used to adjust input levels of the different inputs.
Equalizer controls
12)
This is used to regulate the degree of treble, middle and bass in the sound.
Balance-Pan control
13)
The balance between the amount of sound on the left and on the right is adjusted by using
this knob. When it is set to the center position, the gain is the same for the left and the right
channel.
Channel faders
14)
Volume control for every input.
Remote control switch option
15)
This switch is used to start and/or stop any connected apparatus from the mixing panel.
DJ micro input
16)
Microphone input with priority on the input on the back of the set.
Level adjuster
17)
Mike level for accurate adjustment of different types of microphones.
Equalizer
18)
Triple tone control for DJ microphone.
Pan Mic
19)
Panoramic control for the DJ-microphone input. With this button you can place the mike
signal somewhere between left and right.
Talk-over control
20)
Variable stage gain control level music suppression.
DJ mike fader
21)
Volume control for DJ mike
Master output fader
22)
Volume controls final output of mixer towards slave or integrated amplifers.
Monitor output fader
23)
Volume control for the signal level for the monitor output, this output does not contain the DJ-
mic signal.
Record Select
24)
This switch is used to make recordings with or without the DJ microphone.
+ DJ MIC : in this position you add the signal of the DJ mike to the music.
- DJ MIC : in this position you record only the signal from channel 1 - 4 (8).
www.liveline.be
MX180
MKIII
4