Optika Italy B-290 Serie Mode D'emploi page 14

5. Fix the rotating part of the junction using the black wing-nut
①. (Fig. 13)
6. Then hook the Tablet PC onto the 4 screws of the junction
and pull toward down to firmly lock the Tablet PC in the hold-
er. (Fig. 14)
• To unlock the Tablet PC proceed with the opposite operation:
push toward up and remove it from the holder.
7. Plug one side of the USB cable
the other side to the Tablet PC using the connector ③. (Fig.
15-16).
8. Plug the power supply cable to the Tablet PC for battery re-
charge using the connector ④. (Fig. 16)
• The Tablet has been set with the Rotation function disabled:
this prevents any flipping of the Live View in order to get a
continuous and as large as possible view of your slide also
when the Tablet is removed from the holder.
• To enable this function again: you can activate the Rotation
by swiping the screen on his bottom right side and selecting
Settings + Screen. Anyway, it's not suggested to activate the
function when the camera is in Live View mode as it may give
troubles when the camera runs at high resolutions.
to the digital head and
②
Page 14
②
③
④
①
F ig. 13 F ig. 13
F ig. 14 F ig. 14
F ig. 15 F ig. 15
F ig. 16 F ig. 16