Publicité
Les langues disponibles
Les langues disponibles
3. Rotate the locking pins counterclockwise as far as they will go.
▶ The locking pin pops out.
4. Insert the crimping or cutting jaws.
5. Push the locking pins in until they engage.
The locking pin is engaged correctly when it projects slightly on the other side of the crimping or
cutting jaws.
5.6
Removing crimping or cutting jaws
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping /pressing or cutting jaws.
1. Turn the crimping head so that the locking pin is easily accessible.
2. Press the locking pins.
3. Rotate the locking pins counterclockwise as far as they will go.
▶ The locking pin pops out.
4. Work the crimping or cutting jaws forward and out of the product.
5.7
Inserting crimping die (only for crimping jaws with crimping dies)
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing die.
Never operate the product without a crimping die installed!
1. Select suitable crimping dies.
2. Turn the crimping head so that the mount for the crimping dies is easily accessible.
3. Push the crimping dies in until they engage.
5.8
Removing crimping die (only for crimping jaws with crimping dies)
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before fitting, changing or removing the crimping / pressing die.
1. Turn the crimping head so that the mount for the crimping dies is easily accessible.
2. Pull out the locking pin of the crimping die you want to remove.
3. Remove the crimping die.
5.9
Changing the cutting edges
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before inserting, changing or removing cutting edges.
1. Unscrew the securing screws of the cutting edge guide.
2. Work the cutting edge guide forward and out of the product.
3. Unscrew the cutting edge securing screws.
4. Ease the old cutting edges forward and out of the product.
5. Insert the new cutting edges into the product.
6. Tighten the cutting edge securing screws.
7. Set the cutting edge guide on the cutting edge.
8. Tighten the securing screws of the cutting edge guide.
10
English
3
6
4
5
2321737
*2321737*
Publicité
