Optional Fitting Adapters - EGO PECM01 Guide D'installation

Guarantee
The Ego caravan mover system is provided with a parts only warranty for a period of 2-years from the date of purchase.
Any warranty claims must be directed through the place of purchase with a proof of purchase provided.
Within this two year period, the manufacturer will, at their sole discretion, replace or repair any parts that have failed if
deemed to be due to a manufacturing defect.
The manufacturer reserves the right to charge for any repair, or costs incurred whilst processing a claim, that is deemed
to be due to customer misuse or neglect. This warranty is not offered for any type of trade or commercial usage.
The manufacturer does not take responsibility for any consequential loss whatsoever.
Upon inspection, components that are missing when checked against the packing contents list must be reported to the
place of purchase within 5 working days.
Please fill-in the Serial Number and the Product Registration form and return to the
appropriate address. Important! Retain this manual for future reference.

Optional Fitting Adapters

Ref: PECM01-UM-0110-Rev.A.
Additional chassis clamp adapters are available, as follows:
Low Profile Chassis Adapter Plates (Part No. 346-052)
If your chassis frame height is less than 140mm these plates
must be fitted to lower the assembly to provide the correct
height of 185mm. Drilling of your chassis may be required.
Note: In some countries, the installation must be checked by
a professional technician in order to adhere to local regula-
tions.
Narrow Gauge Chassis Adapters (Part No. 346-053)
These plates must be utilised if you have an AL-KO Vario III/
AV chassis which has a frame thickness of less than 2.8mm.
These must be positioned behind the axle using pre-drilled
holes already available on the chassis; so your Ego mover
must be fitted behind the axle.
16mm Spacers - 1 pair (Part No. 346-051)
Use spacers to lower the Ego mover assembly if your chassis
has a frame height of between 140 to 185mm. A maximum
of 3 sets of spacers can be utilised to achieve correct frame
height of 185mm. A set of extended clamp bolts must be
used in conjunction with these spacers (Part No. 346-054).
Set of 8 M10 x 100 Bolts (Part No. 346-054)
Set of 8 extended clamp bolts for use with 16mm spacers
(Part No. 346-051)
Ego Page UK-10