Mounting Aid; Internal Lift-Off Protector With Integrated Jack-Up; General Information - Sartorius Contego Manuel D'installation
Module de pesage hygiénique load cell pr 6241 d1; module de pesage hygiénique load cell pr 6241 d1e; module de pesage hygiénique load cell pr 6241 c3; module de pesage hygiénique load cell pr 6241 c3e
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Manual
2.2
Mounting Aid
The auxiliary mounting plates (1) facilitate installation of the weighing module.
2.3
Internal Lift-Off Protector with Integrated Jack-Up
2.3.1
General Information
The Contego® Weighing Module is equipped with an internal lift-off protector, i.e. no additional borings
apart from the mounting holes in the vessel foot are required. Moreover, the vessel can be lifted by turning
the lift-off protector bolt (3) (see Chapter 2.3.2), e.g., when the weigh cell must be replaced.
Sartorius
Hygienic Weighing Module Contego®
Pos.
Description
1
Upper plate
2
Bolt (2x)
3
Lift-off protector
4
Locknut
5
Threaded bush
6
Lower plate
Remove the auxiliary
mounting plates
after mounting.
EN-5
Publicité
Chapitres
Table des Matières
