Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
MAINTENANCE
The chain is correctly tensioned when there is no
Rotate clUtch coVeR lock
sag on the underside of the guide bar, the chain is
knob clockwise to secURe
snug, but it can be turned by hand without binding.
Ensure that the chain brake is not set.
NOTE: If chain is too tight, it will not rotate. Loosen
the clutch cover lock knob by pressing in and
slightly rotating counterclockwise, then rotate the
chain tensioning dial counterclockwise. Lift the
tip of the guide bar up and retighten the clutch
cover lock knob securely. Ensure that the chain
will rotate without binding.
adjUsting
pin
chain
clUtch coVeR
Fig. 40
tensioning dial
lock knob
Fig. 41
chain tensioning
pin hole
clUtch
coVeR
spRocket
loosen
tighten
chain
chain
Fig. 39
Fig. 42
Page 27 — English
Publicité
