Charging Station; Wall Mount - Genius Invictus X7 Mode D'emploi

Charging Station

Wall Mount

Emptying the Dust Container (quick clean)
Instructions for use
Specially designed for the space-saving and safe storage of the
appliance. Remove the tube from the main unit and place it on the
charging station as illustrated.
There is a recess on the front side for the motorized power brush
(with or without tube) and 2 accessory holders.
Also has a battery charging function (See: Charging the battery).
Affix the wall mount to the wall using the supplied screws. Ensure
that there are no pipes or electric cables behind the screw insertion
points in the wall.
The recesses on the mount can be used for cable storage to prevent
the charging cable from hanging on the floor when not in use.
Do not empty the dust container until the dust has reached the max.
line. Detach the tube and any accessories before emptying the dust
container.
Hold the appliance with dust container over a waste bin. Press the
dust container's release button. The flap opens and the dust falls into
the bin.
Close the dust container flap again after emptying the container.
GB
33