PCWork PCW01A Mode D'emploi page 20

Diode Test
1. Turn the rotary switch to the measurement function " " and
select the diode test function with the "FUNC." button. The
display will show "
2. Insert the red probe in the "
probe in the "COM" socket.
3. Connect the probes' tips with the measuring diode. If known,
connect the red probe's tip with the anode and the black
probe's tip with the cathode.
4. The measurement result is displayed on the screen.
5. If the screen shows "OL", the measuring diode is either in
reverse direction or defective.
WARNING:
When doing a diode test on the line, disconnect the power
supply, ensure there is no source of voltage, and discharge
all capacitors. Otherwise, the instrument might get damaged
and might be in danger of an electric shock. When measuring
is finished, always remove the probes from the measuring
object and the device.
", "OL" and "V".
" socket and insert the black
20