Publicité
Les langues disponibles
Les langues disponibles
WARNING:
•
The voltage in the measured circuit cannot exceed 250V; otherwise the device
might get damaged.
•
If the display shows "OL", disconnect the probes' tips from the measuring
circuit immediately (current exceeds measurement range).
•
Always test known current before using the device, to ensure that device
functions properly
•
When measuring large current (>5A), continuous measurement should not
exceed 10 seconds. After that, disconnect the device from the measuring
circuit and do not use the multimeter for 10 minutes.
•
When measuring is finished, always remove the probes from the measuring
object and the device.
Caution:
To avoid damaging the instrument or equipment, check the fuses before
measuring and ensure that the measured current does not exceed the rated
maximum current. If the fuses are released during measurement, stop the
operation immediately. Always use the correct input sockets.
17
Publicité
