Publicité
Les langues disponibles
Les langues disponibles
After refilling, hold the tool away from the tree. Start it
and wait until lubrication on saw chain is adequate.
Fig.32
Attaching the shoulder harness
CAUTION:
When you use the tool in combi-
nation of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the tool package, but use the
hanging band recommended by Makita.
If you put on the shoulder harness included in the
tool package and the shoulder harness of the back-
pack-type power supply at the same time, removing
the tool or backpack-type power supply is difficult in
case of an emergency, and it may cause an accident
or injury. For the recommended hanging band, ask
Makita Authorized Service Centers.
CAUTION:
Always use the shoulder harness
attached to the tool. Before operation, adjust the shoul-
der harness according to the user size to prevent fatigue.
CAUTION:
Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
CAUTION:
Before operation, make sure that the
buckle of the shoulder harness is fastened firmly.
CAUTION:
Always use the shoulder harness dedi-
cated to this tool. Do not use other shoulder harnesses.
1.
Put on the shoulder harness and fasten the
buckle.
Fig.33
► 1. Buckle
NOTE: When removing the shoulder harness, unlock
the buckle and remove the shoulder harness.
2.
working position.
Fig.34
3.
hanger.
1
Fig.35
► 1. Hook 2. Hanger
The shoulder harness features a means of quick
release. Simply squeeze the sides of the buckle to
release the shoulder harness.
1
Fig.36
► 1. Buckle
1
17 ENGLISH
Adjust the shoulder harness to a comfortable
Clasp the hook on the shoulder harness to tool's
2
Publicité
