Publicité
Les langues disponibles
Les langues disponibles
PORT
LAN/POE
REL1, REL1
REL1
REL1
REL2, REL2
REL2
REL2
BELL, BELL
EXT, EXT
EXT
EXT
15 VDC -
15 VDC +
Only related for devices with call button(s):
4 PIN (SWITCH)
12
DESCRIPTION
RJ45 jack to connect the Network coming from the Internet Router/PoE-Switch/PoE-
Injector.
Do not power the device simultaneously via the power supply from the power
NOTIC E
supply unit (mains adaptor) and the power supply via PoE.
Bi-stable latching relay #1, max. 24 V DC / A C, 1 Ampere. Security feature: The relay keeps
its state even in the case of loss of power. You can configure the default state of the relay
(open/close) via the DoorBird App. These ports can be used to connect e.g. an electric door
opener. The device does not supply power to the connected device. The power supply for
the electric door opener must be installed separately.
When wiring an electric door opener directly to a door station, there is a risk that
the electric door opener could be tampered by unauthorized third parties (e. g. by
breaking the door station and short-circuiting the wiring of the door opener).
Therefore, we generally recommend the use of a remote safety relay mounted
indoors (e. g. DoorBird I/O Door Controller A1081) for wiring an electric door
opener for a more secure installation in your home.
Bi-stable latching relay #2, max. 24 V DC / AC, 1 Ampere. Security feature: The relay keeps
its state even in the case of loss of power. You can configure the default state of the relay
(open/close) via the DoorBird App. These ports can be used to connect e.g. an electric door
opener. The device does not supply power to the connected device. The power supply for
the electric door opener must be installed separately.
When wiring an electric door opener directly to a door station, there is a risk that
the electric door opener could be tampered by unauthorized third parties (e. g. by
breaking the door station and short-circuiting the wiring of the door opener).
Therefore, we generally recommend the use of a remote safety relay mounted
indoors (e. g. DoorBird I/O Door Controller A1081) for wiring an electric door
opener for a more secure installation in your home.
Reserved – Do not use!
NOTIC E
Door opener button, max. 0 V DC / AC, 0 Ampere. These ports can be used to connect e.g.
a door opener button inside the home. It will trigger the first bi-stable latching relay of the
device (REL1, REL1).
Please make sure to add no voltage on these ports. Extra voltage may destroy
NOTIC E
the device immediately.
15 V DC Power supply input, negative pole (-). Since no power supply unit is included in the
scope of delivery, we do not test the power supply via power supply unit at the device. We
only recommend PoE, since it is standardized, and the network connection of the device is
exclusively via LAN.
15 V DC Power supply input, positive pole (+). Since no power supply unit is included in
the scope of delivery, we do not test the power supply via power supply unit at the device.
We only recommend PoE, since it is standardized, and the network connection of the
device is exclusively via LAN.
Use the yellow cable to connect the button to the IP Video Door Station.
Publicité
