Hooking Up The Components; Unpacking - Sony TA-N9000ES Mode D'emploi

Hooking Up
the
Components
This chapter describes how to connect
a Sony TA-E9000ES control amplifier,
your speakers, and your other audio
components to the power amplifier.
Be sure to read this section before
making any connections.
4 US

Unpacking

Check that you received the following items:
• Control A1 cable (1)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum and
noise.
• When connecting an audio cord, be sure to match the
color-coded pins to the appropriate jacks on the
components: white (left) to white; and red (right) to
red.
• When connecting the center channel, you can use either
the red or white pins on the audio cord.