Publicité
Les langues disponibles
Les langues disponibles
Before use
Before using the robot, remove the protective tape on the robot and
peel off the protective film on the charging station.
Removing protective strips
Instructions
CHARGING THE ROBOT
1. Positioning and loading:
The charging base should be placed
against the wall and on a flat surface.
Do not place any objects near the
charging base 0.5cm to the left and
right of the base and 1.5m in front of
the base.
2. Connect it to the power supply.
3. Installing the side brushes: Install the
side brushes respecting the left and
right side (L / R).
Removing protective strips
EN-12
Publicité
