Cleaning Carpets And Rugs; Cleaning Wooden Floors; Using Wax Cleaners - Duplex STANDARD 340 Instructions D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour STANDARD 340:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING
This procedure is not recommended for carpets, rugs and wooden
floors.
6.6.2

CLEANING CARPETS AND RUGS

Using the slider control, select the correct position (normal carpets / long pile carpets).
We advise you to cross the washed tracks so that all fibres appear well cleaned taking
care not to wet them too much.
(Make several trial runs before proceeding with the full washing operation).
6.6.3

CLEANING WOODEN FLOORS

Do not wet the floor excessively, especially non varnished floors that absorb water more
readily. In any case, be very careful with these types of floor and preferably
carry out a few tests before washing all of it.
6.6.4

USING WAX CLEANERS

The "Lavaincera" (wax cleaners) treatment system allows the entire surface to be thoroughly
washed, obtaining an optimal "polished look" and an instantaneous recovery of the dirt in
a simple, fast and cheap manner.
It is extremely suitable for the following floor types:
Terracotta
Smooth tiles
Clinker
Marble
Granite
Studded rubber flooring
Proceed as follows:
1)
Use the appliance with the two grey brushes provided.
2)
Fill the two tanks with the appropriate detergent (can be requested to the Manufacturer)
mixing it with water according to the instructions contained on the bottles;
3)
Proceed with the usual washing system.
After washing, we recommend going over the surface using the brown polishing brushes
to give a greater shine to the floor.
Rev.
1.0
ASSEMBLING THE APPLIANCE
107
DUPLEX 340/420/620

Publicité

Table des Matières
loading

Table des Matières