How To Wash Floors; Stage 1 - Duplex STANDARD 340 Instructions D'utilisation Et D'entretien

DUPLEX 340/420/620
ASSEMBLING THE APPLIANCE
6.4

HOW TO WASH FLOORS

6.4.1

STAGE 1

1) From the starting position, move forward towards the corner as indicated in the figure.
2)
Once you have reached the corner, move backwards with the appliance and keep
cleaning the strip until you reach your starting position.
3) From the starting position move to the second lane to wash slightly overlapping the
area you have cleaned before.
4) Repeat this operation until you complete stage 1.
5)
Clean the outer edge on the opposite side of the cleaning area, reversing the appliance.
6.4.2 STAGE 2
1) Reverse the cleaning direction of the appliance by using the handle.
2) Repeat the operations described in Stage 1.
The possibility of reversing the position of the handle allows the operator to easily work
in both directions and to clean and wash floors and carpets thoroughly.
Starting position
Stage 2
Starting position
Stage 1
102
F.12
Rev.
1.0