Operating Procedure For All Models - Duplex STANDARD 340 Instructions D'utilisation Et D'entretien

6.3

OPERATING PROCEDURE FOR ALL MODELS

1) Press the main switch on the handle.
2) Grip the handle and press the safety lever. Slowly lower the handle on one of the sides.
The appliance will start up and the revolving brushes will start working on the
3) Move the appliance slowly forwards, going over the same washing path with the
recovery device MU (MOP UP) enabled.
4) When the appliance is moving forwards, dispense the washing solution by activating
the lever underneath the handle at short intervals, taking care not to flood the floor.
When in use, the dirty water is collected immediately in the recovery tank 1 that must be
emptied as soon as it is full by removing it from its seat.
Rev.
1.0
ASSEMBLING THE APPLIANCE
101
DUPLEX 340/420/620
floor.
1
F.11