Cleaning And Maintenance Of The Brushes; To Remove The Brushes - Duplex STANDARD Instructions D'utilisation Et D'entretien

1.16

CLEANING AND MAINTENANCE OF THE BRUSHES

DUPLEX brushes require little routine maintenance.
The high rotation speed during cleaning manages to centrifugate dirt and keep them efficient
at all times.
However, check their status and clean them, if necessary.
WARNING
Remove the plug from the power socket before cleaning the brushes.
In addition to cleaning, it is necessary to perform the following operations periodically:
1. Remove the brushes from the machine (see following section);
2.
Dip them in a container with cold or lukewarm water and let them soak for a few hours;
3. Stir and rinse the brushes well;
4.
Re-fit the brushes in reversed position in relation to the one they had before (point 1).
This is necessary as the bristles tend to bend when the brushes always rotate in the same
direction.

TO REMOVE THE BRUSHES

1. Use the supplied screwdriver to remove the two screws on the stainless side panel (1).
2.
Extract the two brushes together with the side panel (2).
3. Separate the two brushes from the side panel.
1
2
69
DUPLEX 340-420-620
Figure 1.20