Mitsubishi Electric TRANE TPKA0A 1KA Serie Manuel D'utilisation page 10

3. Operation
3.6. Timer
■
Timer functions are different by each remote controller.
■
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
B
A
Fig. 3.6.1
Fig. 3.6.2
Fig. 3.6.3
Fig. 3.6.4
C
Fig. 3.6.5
3.7. Ventilation
For LOSSNAY combination
■
The following 2 patterns of operation is available.
• Run the ventilator together with indoor unit.
• Run the ventilator independently.
Note:
 With some model configurations, the fan on the indoor unit may come on even when you set the ventilator to run independently.
For wireless remote controller
 Running the ventilator independently is not available.
 No indication on the remote controller.
9
Weekly schedule (Wireless remote controller)
■
The weekly schedule can be set to four operation patterns for each day of the week. The settings include
the on and off times and the set temperature.
<Editing mode>
1. Switching to the editing mode
1 Press the button when the unit is operating or stopped.
blinks. (Fig. 3.6.1)
2. Selecting the setting pattern
1 Press the button to select the setting pattern number.
Each time the button is pressed, the pattern number
1 → 2 → 3 → 4.
3. Selecting the day of the week
1 Press the button to select the day of the week to set.
Each time the button is pressed, the day of the week
Mon → Tue → Wed → Thu → Fri → Sat → Sun → All days.
4. Selecting the operation settings
1 Push the button to select the operation on or off setting. (Fig. 3.6.2)
is lighted.
Each time the button is pressed, the setting changes in the following order:
2 Press the button to select the operation time. (Fig. 3.6.3)
The operation time blinks.
Set the operation time using the
• The operation time can be set in 10-minute increments.
3 Press the button to select the set temperature. (Fig. 3.6.4)
The set temperature blinks.
Set the temperature using the
• When setting the off operation, the temperature cannot be set.
When the AUTO (dual set point) mode is enabled, press the
C and the lower limit D. (Fig. 3.6.5)
4 By pressing the
5 Repeat steps 2–4 to select the settings for each day of the week.
<Transmitting the settings>
Point the transmission area of the wireless remote controller towards the receiver on the indoor unit and
D
operate the controller. Confirm that the indoor unit beeps 7 times.
Press the button.
<Enabling the weekly schedule>
Press the button.
The weekly schedule operates when
• The weekly schedule does not function when the On/Off timer is enabled.
The weekly schedule operates when all of the On/Off timer settings have been executed.
Note:
● When using the weekly timer, please set the wireless remote controller in the signal receivable area of the receiver
on the indoor unit.
buttons.
buttons.
button, the pattern number settings for the displayed day of the week are deleted.
is on.
changes in the following order:
A
changes in the following order:
B
→
button to switch between the upper limit