Epson TM-C3400BK Manuel D'utilisation page 13

Removing fanfold paper
1. Remove the paper left on the paper ejection table.
2. When you change the paper type, open the roll paper cover and
the fanfold paper cover to remove the paper.
3. Close the roll paper cover and the fanfold paper cover.
➁
Setting paper position detection
When paper position detection setting does not need to be changed,
skip this step. Use the printer driver for this setting.
1. Turn on the printer.
2. Change [
Utilities
Note:
For information on how to display the printer driver, see page 20.
3. Turn off the printer.
CAUTION:
The changed setting of the paper position detection is stored in the
printer when the printer is turned off. Be sure to turn off the printer to
enable the setting.
Paper Position Detection
] tab of the printer driver depending on the paper to use.
Maintenance And
] on the [
TM-C3400BK User's Manual 13
English