ergoCentric upCentric UP-2LV Guide De L'utilisateur page 12

Step 7 :
Attach frame and handset to tabletop.
7.1 :
Place the frame in the center of the tabletop ( aligned with pilot holes,
or in desired location ) and attach frame to tabletop with 14 screws ( D ).
7.2 :
Place handset ( K ) in the desired location and attach with screws ( E ),
then secure excess wire into wire clips on underside of frame.
Step 8 :
Attach feet ( J ) to the
ends of the table legs
with bolts ( B ).
7.1
upCentric – UP-2LV Owner's Manual | Guide de l'utilisateur
®
7.2
11