Garland MULE 661 E Manuel D'instructions page 34

English
9. TROUBLESHOOTING
Depending on the symptoms detected you can probably find the cause of the problem and find a solution.
PROBLEM
Engine does not work
Abnormal noises
Abnormal vibrations
In any other case, take the machine to your nearest after sales service.
CAUSE
Machine not connected to mains
Cable damaged
Damaged switch
Worn out brushes
Overload protection activated
Blocked blades
Transmission with little grease
Screws and nuts of blades loose
Blades worn out or damaged
Internal engine or transmission problem
34/112
ACTION
Collegare la macchina all´allimentazione
Take to service agent
Take to service agent
Take to service agent
Allow the machine to cool 15 minutes
Unplug the machine, wait for blades
to stop and remove elements blocking
the blades
Fill up with grease as per manual or
take to service agent
Check and tighten
Substitute the blades
Take to service agent