Warnings And Suggestions - Ceado E37S Manuel D'utilisation

GB
ADJUSTING THE FILTER-HOLDER
SUPPORT
The filter-holder support has been designed to work
with the different holders found on the most
widespread coffee machines on the market.
Using a medium size Phillips screwdriver, slacken
the support adjustment screw (1 Fig. 5), position the
filter-holder on the support (2 Fig. 5), adjust its
height and then tighten the screw again.
The optimum adjustment is the one that supports
the filter-holder in a perfectly horizontal position.

WARNINGS AND SUGGESTIONS

Never operate without hopper and lid in place.
Make sure that shutter is completely open (to the last click) (see Fig. 6).
Do not let the coffee grinder run long without coffee
beans in the hopper; if this were to happen it would
cause tripping of the motor thermal overload
protection. In that case it is necessary to wait until
the overload protection is reset before starting to
grind coffee again.
For this reason, never leave the pack of coffee
beans sitting in the hopper as this prevents you
seeing how many coffee beans are left.
When the coffee grinder is not to be used during the
time when the business is closed, it should always
be switched off with the main switch.
Put only coffee beans in the hopper, not
ready-ground
substances.
coffee or other
35
2
1
Fig. 5
Fig. 6