Ceado E37S Manuel D'utilisation page 28

28
Manual operation
3
To grind coffee continuously, without any time setting, press the buttons
simultaneously.
Both LEDs will light up and the display will show:
Taking out the coffee
4
When the appliance is READY, to start grinding press the start button (11 Fig. 1) with the filter
holder and keep the filter holder in position until distribution is ended. During operation the
respective LED flashes and the message WORKING appears on the display.
Note: Only in automatic operation, the display will also show the time remaining to complete
distribution.
At the end of distribution the appliance returns to its initial READY status, waiting to grind a new shot
the same as the last one set.
Note: When the motor is running without grinding coffee beans, it may happen that a metallic noise
is heard coming from the spout. It is normal and it is due to the vibration of the inside flap,
and it will stop when starting grinding coffee beans.
DISTRIBUTED SHOT COUNTERS
The coffee grinder has a general counter in which it stores the number of shots distributed since it
left the factory (this value cannot be reset) and a partial counter for the number of shots distributed
since it was last reset by the user. For each type of counter, a distinction is made between the
number of single, double and extra shots.
Note: Due to statistical tests on the product in the factory, some of the counters may be different
from zero.
Reading the counters
Press the button
+ double shots + extra shots + manual doses):
By pressing the button
shots distributed since the last reset:
. The display will show first the partial counter of the total shots (single shots
or you can also distinguish between the single, double or extra
GB
and