Yamaha YRS-2000 Mode D'emploi page 7

Notes
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner's manual for each component.
• About assembling this unit, refer to the supplied Quick Setup Guide.
• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
• y indicates a tip for your operation.
• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and the product, the product has priority.
1
After assembling, install this unit in your listening room.
See the separate "Quick Setup Guide" and "Installation" on page 13.
2
Connect this unit to your TV and other external components.
See the separate "Quick Setup Guide" and "Connections" on page 15.
3
Prepare the remote control and turn on the power of this unit.
See "Getting started" on page 24.
4
Run AUTO SETUP.
See "AUTO SETUP (IntelliBeam)" on page 29.
5
Play back a source.
See "Playback" on page 39.
6
Change the beam modes.
See "Enjoying surround sound" on page 42.
7
Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See "MANUAL SETUP" on page 53 and "Remote control features" on page 71.
Using this manual
If you want to make additional settings
and adjustments
Using this manual
5
En