Publicité
Les langues disponibles
Les langues disponibles
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back
in each beam mode to achieve a more true-to-life surround sound experience.
Using the test tone
You can use the test tone feature to output a test tone from
each channel to manually balance the channel levels.
Use this to set the channel levels so that the volume level
of each channel is identical when heard from your
listening position.
CH LEVEL
ENTER
TEST
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press TEST.
"TEST FRONT L" appears in the front panel display
and a test tone is output from the front left channel.
TEST
Adjusting the audio balance
MENU
TV/AV
YSP
RETURN
3
Press
/
to select the channel you want
to adjust.
The front panel display changes as follows:
ENTER
Note
"TEST SUBWOOFER" is only available when SWFR is
selected for BASS OUT in SOUND MENU (see page 59).
4
Press
/
to adjust the channel volume.
ENTER
Control range: –10.0 dB to +10.0 dB
Adjusting the audio balance
TEST FRONT L
TEST CENTER
TEST FRONT R
TEST SUR.R
TEST SUR.L
TEST SUBWOOFER
65
En
Publicité
